Usted está aquí: Hogar » FAQ
FAQ
1, GOST certificate of suspended platform
This is a certificate of suspended platform for ZLP1000, ZLP800, ZLP630 and ZLP500.
“Certificate of conformity GOST R (also known as quality certificate, State Standard Certificate, clearance certificate, GOST R certificate and etc.) - is a document, issued in accordance with the rules of certification system in order to confirm correspondence of quality and safety of certified products (services) to the stated requirements, applicable standards (GOST, GOST R, GOST R IEEC, GOST R ISO and etc.). Certification of products (services) may be obligatory and voluntary.

A certificate of compliance is intended for certification of goods produced either by Russian companies or shipped to Russia by an importer - company. A certificate of compliance can be issued for a batch of goods and for a series production. In the former case a certificate is legalized for a company engaged in supplying goods to the Russian market. Its validity varies with terms of a sale contract. In the latter case a foreign manufacturer of supplied goods is both an applicant and a recipient of a certificate.

This type of a certificate is valid for a period identified in a certification document. Certification is carried out by our specialists on production premises of a company seeking certification of goods it manufactures. On the basis of results obtained during testing samples of goods in a laboratory an appropriate certificate of series production compliance is issued.
Certificate of compliance with GOST R for products may be issued provided requisite additional certification documents are available: a hygienic report, a veterinary certificate, fire safety certificate, etc. A certificate of compliance with GOST R should contain references to the above documents. “(Fromhttp: //serconsrus.com/services/gost_r/)

This certificated is authorized by “Sertification Authorith” whose website is as below: www.serconsrus.com (If your want more information about this certificate document, you can visit this website.)

Rostov - na - Donu: +7 (863) 248 - 09 - 67
Novosibirsk: +7 (383) 378 - 88 - 05
Voronezh: +7 (4732) 502 - 777
Ekaterinburg:    +7 (343) 384 - 57 - 81
St. Petersburg: +7 (812) 309 - 16 - 89
Kazan: +7 (843) 206 - 01 - 38
2, Suspended platform wide application on high rise window cleaning (facade cleaning)
With more and more high rise buildings appearing all over the world, high rise building cleaning has become more and more important. The article mainly introduces the suspended platform (swing stage) application on the high rise building facades cleaning, and its advantages than BMU and Bosun' s chair.

Exterior works of high rise building include high rise window cleaning, exterior wall cleaning, curtain wall clean, high - rise exterior wall paint, concrete repairs, sealing and aerial advertizing installation etc. This article mainly introduces the application of suspended work platform in high rise external wall cleaning.

According to the characteristics of high - rise building, the main equipments that are used in exterior wall cleaning include three kinds as below:
1) Building Maintenance Unit, also is called BMU
2) Temporary Suspended Platform or Swing stage
3) Bosun' s chair

The BMU is a special equipment for exterior wall cleaning of high - rise building. Its main usage is cleaning exterior wall of modern high - rise building, which change the traditional suspended work operation into automatic, efficient, high quality mechanical operation. It is the latest generation of powerful exterior wall cleaning robot, and fills up the blank from domestic to overseas in high - rise building exterior wall maintenance. In China, some of senior high - grade constructions, which were built in 80 - 1990s, were designed by foreign architects and they had considered the installation of BMU since then and adopted abroad BMU to maintenance building. These efforts have laid a good foundation for building cleaning. But since 1990s, there are many buildings had not considered the application of BMU when they were designed and some of them can not be installed BMU, at the same time, BMU does not belong to standard products and also often bring higher cost, all of those lead to BMU has not been widely used nowadays.

Because of Bosun' s Chair' s flexibility, it has been widely adopted in the world. However, as its risk in operation and often brings accidents, the Bosun' s Chair has been more and more replaced by suspended work platform. We believe this is a tendency of development. Now, in China, many cities have already stipulated that in aerial work cleaning, workers must use suspended work platform and forbid to use Bosun' s Chair, to avoid more accidents happening.

The suspended work platform is a new type of aloft working machinery. Because of it' s operate smoothly, comfort, safety, energy saving etc, it has been widely used in domestic decoration and cleaning industry.

The main materials of exterior wall include glass curtain wall, Aluminum composite plate, marble, granite, mosaic, ceramics, drying sticky stone, granitic plaster stone and so on. Due to the dust, grease and erosion caused by acid rain (fog), the new buildings become smudgy easily in short time, especially in some serious air pollution cities.

According to the weight - bearing ability, the suspended work platform can be divided into 1000kgs, 800kgs, 600kgs, 500kgs and 250kgs etc. According to the length of platform, it contains 10m, 7.5m, 6m, 4m, 2m and so on. The length of platform can be assembled to suit for different requests. Now the main types that are usually used in cleaning industry include ZLP630 and ZLP250 and the length ranged from 6 to 10 meters is more popular.

Preparation work before construction
1) Check the work site and assure the plan. Check the roof condition and ensure that it can be installed suspended work platform and sure the movement has no obstacle like neon lights and billboard. The engineers design construction plan.
2) To ensure the construction environment without wind, snow and high temperature, low temperature phenomenon. The wind in site should less than 6 levels.
3) Prepare cleaning tools such as bucket, gun, towels and sucker etc.
4) Two workers carry cleaning tools, get into platform cradle and fasten safety belts.

Do safety inspection before operation.
1) To check each parts in suspended work platform (swing stage), for exam, if the fasteners, fittings, hoister, and safety protection devices in good state and confirm no hidden dangerous before work.
2) To check whether the suspension mechanism installed on roof, fasteners, drawing rope are firm and confirm no hidden trouble in operation.
3) To check the length of safety rope and see if there were any damage or broken stocks on it.
4) Fixed the safety rope and confirm the length is more than building height.
5) To check the insurance belt employee used no damage.
6) To check if the safety lock is flexible and reliable.
7) To check if the fixed position where the safety rope joined on the top of building is firmly.
8) To check if the staff dresses meet the following requirements: wearing a helmet and wearing long - sleeved work jacket and long pants. In corrosive environment, let workers wear corrosion - resistant clothes and shoes with soft bottom, which also features of corrosion - resistant.
9) To check if the junction between safety rope and building parapet has the liners. If found no, we shall be stop working immediately.
10) The employee' s self - lock device installed on insurance belt should be knotted on safety rope, not buckle in suspended platform.
11) Please set up the fence in operation area and arrange one ground security officer to preventing pedestrians. If no security officer or protecting fence, we should stop the work. 12. Check the attitude of workers who operate in top of buildings, if have some problems, stop working.

Operation process
1) Use water gun to wash corners and remove dust.
2) Dip spreader into barrels and after it fully absorb sanitizer, we smear evenly on the surface of glass. Later use wiper scrape glass up and down including window frame and corners. Ensure to pull crossly and no miss some small place and then use towel dry it.
3) After finishing one position, let the platform move to the below site and when end the cleaning from top to bottom, we turn left or right to adjacent position and continue to work from top to bottom again.
4) After finishing total work, sorting machines and tools and remove fences and billboard and clean the water on ground.
5) Cleaning and maintenance equipment and after removing dust and dirt we pack the device in warehouse.
3, Difference between the scaffold and suspended scaffolding
1) What is scaffold
The scaffold refers to various brackets which are laid to solve vertical and horizontal transportation for the workers in the construction site. Scaffold is the universal term in the architectural field and is used in the places where outer wall and inner wall are decorated or the building in high floor can' t be directly constructed. Scaffold is mainly used for construction, periphery safety grid maintenance and overhead installation, etc., that is lay the scaffold Universally, the scaffold is made of bamboo, timber, steel tube, composite material, etc. Some projects uses the scaffold as a template; moreover, it is widely used in advertizing industry, municipal facility, traffic road and bridge, mine and other departments

2). What' s suspended platform
The suspended scaffolding is high - efficiency modern overhead operation equipment capable of replacing a traditional scaffold and being reused. Generally, the suspended scaffolding can be divided into two kinds: manual and electric. It is widely applied to the outer wall construction, curtain wall installation and outer wall cleaning and maintenance in high rise; and it can be also applied to large tanks, bridges, dams and other engineering operations.

The suspended scaffolding is manufactured by the manufacturer with the building mechanical production license; its product quality must meet the stipulation of industrial standards “Safety Inspection Standard of Building Construction” and “Safety Rule of Suspended Platform for Overhead Operation”; moreover, the construction company uses the suspended platform which is recommended by the building safety supervision institution and is identified to be qualified according to “Supervision Management Rule of using Safety Protective Tool and Mechanical Equipment in Construction Site”; No matter which kind of suspended platform or scaffold is used, it must verify the strengthen and rigidity of the working platform and the outrigger structure and the safety coefficient of the steel wire is verified; and all data and reports need to be reviewed and approved by the superior. When manufacturing and assembling the suspended platform, it shall enhance the technical safety supervision and inspect the quality strictly; after being checked and accepted by the superior technical, quality and safety departments, it can be put into use so as to guarantee safe construction.

3). Scope of scaffold and suspended scaffolding
(1) The scaffold is widely applied to houses, bridges, culverts, tunnels, funnels, water towers, dams, large - span canopy frames and various engineering constructions.

Wherein, the member node of the bowl clasp type scaffold is connected by the bowl clasps, which is in stable connection; the combined scaffold has good integration performance; therefore, it has rapid development in application while the gate - type steel tube scaffold can be used as the external scaffold, inner scaffold and full scaffold; it has the features of standardized dimension, reasonable structure, good stress performance, easy detachment and installation in construction, safety, reliability, economy and practicability and thus becomes one of the commonest scaffolds in the world.

If the wheels are installed under the gate frame, it can be used as a mobile worktable for motor installation, painting, equipment maintenance, ads manufacturing; moreover, the external scaffold in the construction has two kinds: single row and double rows; there is only one row of vertical columns in the single row type; the other end of the horizontal pole is born on the wall; the scaffold on the metope needs to be repaired. The external scaffold needs to be bond with the outer wall to increase its stability. One binding piece can be set every three steps and spans; the binding piece can be divided to a rigid type and a soft type. The inner scaffold is installed inside the buildings and used for bricking the wall or decorating the inside. Generally, the inner scaffold is a tool type including a folded type, a support column type, a gate frame type and other structural forms; and it has the features of portability, flexibility, convenience in installation and detachment.

(2) The application scope of the hanging basket is shown in three aspect below:
A. Building decoration, cleaning, and maintenance. As building cleaning and maintenance equipment, the hanging basket is widely adopted in high rise. It can be matched with many device on the roof to complete the cleaning and maintenance, which is simple and reliable in operation and low in maintenance cost.

B. Bridge overhaul, maintenance and construction
The hanging basket is commonly adopted in inspecting, maintaining and constructing the bridge in foreign developed countries; China also adopts it in the renovation of many large - scale bridges.

C. Application in other industries.
The hanging scaffold is widely applied to vessel decoration in the vessel manufacturing industry, installation and maintenance of large - scale cables, overhaul of large dams and installation of shaft elevator orbit.

4) Compared with the scaffold, which advantages does the suspended platform have?
The scaffold shall be used in the building with stories less than 6 floors. Generally, the height of the scaffold is about 2 meters, which is accumulated and laid one by one; considering its stability, the scaffold is also used in low - story buildings or ad plaque.

The electric hanging basket is special for constructing the outer wall of building; and it is always used in high rise with 30 - stories
Moreover, compared with the full steel tube scaffold for outer metope, the suspended platform for constructing the outer wall has the advantages of rapid build - up speed, saving of mass scaffold materials and labor, convenient and flexible operation, good technical and economic benefits. Specifically, it includes:
A. save the rental fee
During the construction of main body, it adopts a subsectional hanging method; after completing the main body, total scaffolds are detached; and the powered suspended platform is used to greatly save the rental fee and shorten the pipeline use time; and it is very rapid, convenient and safe in construction.

B. save the safety grid, paint, and frame plate; Chengdu Scaffold Rental
It adopts subsectional hanging in the construction site; total scaffolds are detached after it cuts off water for the main body; therefore, the safety grid, the pocket grid and the paint have little amount; and it doesn' t need the fully - laid frames; and it can save the production cost again.

C. save labor fee
During the construction period, it adopts vertical transportation in the construction site; when building up the outer frame, it can greatly alleviate the labor strength of the operator; if the condition allows, it can adopt a single - row protective frame in the individual place or part, thereby reducing the labor cost caused by vertical transportation.

D. save transportation fee, consumption, loading and unloading fee, and joist beam cost
As it adopts subsectional build - up, it consumes less amount than the fully scaffold, which will greatly save the consumption, transportation fee, loading and unloading fee, joist steel cost, cleaning fee and low consumable cost.
4, CE certificate of suspended platforms
1) esto es un certificado del alzamiento de la plataforma suspendida, y tipo de los alzamientos el' es LTD80, LTD63, LTD50.
Estos alzamientos se prueban bajo directivas: maquinaria 2006/42/EC; baja tensión 2006/95/EC con los estándares: EN 60034-1: 2010, EN 60204-1: 2006
Este certificado es autorizado por Ente Certificazione Macchine de Italia.
Para más información sobre este certificado, visitar por favor: http://www.entecerma.it o entra en contacto con directo con este direccionamiento:
T. +39 059 763736
F. +39 059 761838
info@entecerma.it
Ente Certificazione Macchine
Vía Mincio, 386 - 41056
Sul Panaro (MES) de Savignano

2) esto es un certificado de plataforma suspendida, y los tipos son ZLP800, ZLP630, ZLP500.
Estas plataformas suspendidas se prueban bajo directivas: baja tensión 2006/95/EC; compatibilidad electromágnetica 2004/108/EC con los estándares: EN 60204-1: 2006, EN 61000-6-2: 2005; En 61000-6-4: 2007+A1: 2011
Este certificado es autorizado por Ente Certificazione Macchine de Italia.
Para más información sobre este certificado, visitar por favor: http://www.entecerma.it o entra en contacto con directo con este direccionamiento:
T. +39 059 763736
F. +39 059 761838
info@entecerma.it
Ente Certificazione Macchine
Vía Mincio, 386 - 41056
Sul Panaro (MES) de Savignano

3) este certificado indica que han llegado nuestros productos ZLP800, ZLP630, ZLP500 las demandas
de la máquina directiva 2006/42/CE con los estándares del 1808:1999 +A1 del EN: 2010.
Machinery Directive 2006/42/EC was published in 2006, is enforceable in the December 29, 2009.
New directive applies:
(a) machinery and equipment;
(b) interchangeable equipment;
(c) safety components;
(d) lift accessories;
(e) chains, ropes, wire mesh;
(f) removable mechanical transmission devices;
(g) the mechanical semi - finished mechanical means.
At the same time, the new version of the Machinery Directive introduces a new conformity assessment procedures - a comprehensive quality assurance (Full quality assurance)
Manufacturers take this program to the mechanical compliance assessment must be in mechanical design, manufacturing, final inspection and testing process to run in line with the relevant requirements of the quality management system and accept the supervision of the designated agency.
This certificate is Authorized by Ente Certificazione Macchine of Italy.
For more information about this certificate, please visit: http://www.entecerma.it or directly contact with this address:
T. +39 059 763736
F. +39 059 761838
info@entecerma.it
Ente Certificazione Macchine
Via Mincio, 386 - 41056
Savignano sul Panaro (MO)
5, Membership of CCMA
Certificado de la ASOCIACIÓN de la MAQUINARIA de CONSTRUCCIÓN de CHINA de calidad de miembro
Nombre del miembro: Maquinaria RÍGIDA Co., Ltd de Wuxi
Nombre de ramificación: Ramificación de la maquinaria de la decoración y del trabajo aéreo
Número del miembro: 3228

Certificado de la valoración de la ciencia y del logro de la tecnología
Nombre del logro: ZLP630 y plataforma suspendida ZLP800
El fabricante: Maquinaria RÍGIDA Co., Ltd de Wuxi
Identificación de la forma: Organizaciones de la reunión de identificación: ASOCIACIÓN DE LA MAQUINARIA DE CONSTRUCCIÓN DE CHINA (CCMA)

Introducción abreviada de (WWW de la ASOCIACIÓN de la MAQUINARIA de CONSTRUCCIÓN de CHINA (CCMA). ) de cncma.org:
La asociación de la maquinaria de construcción de China (CCMA) es una organización nacional registrada de la industria de la maquinaria de construcción aprobada oficialmente por el ministerio de los asuntos civiles de la República Popular de China, que es una organización social con la posición de la persona legal establecida voluntariamente cerca y consistiendo en los fabricantes, los institutos, las universidades, los proveedores de servicios y otras entidades relacionadas del material de construcción en la industria de la maquinaria de construcción. Nuestra autoridad profesional es activos propiedad del gobierno supervisión y Comisión de la administración del Consejo Estatal (SASAC).

El CCMA actual es la consolidación de la asociación anterior de la maquinaria del edificio de CCMA y de China. CCMA ahora tiene más de 2.100 miembros, cubriendo sobre el 85% de la industria entera. Las calidades de miembro incluyen las unidades relevantes de más de 10 sectores tales como maquinaria, construcción urbana, transporte, ferrocarril, metalurgia, carbón, los materiales de construcción, petróleo y gas natural, conservación del agua, energía eléctrica, silvicultura, industria militar y aviación, distribuidos en todas las provincias, municipios y regiones autónomas a excepción de Taiwán y de Tíbet.

CCMA ha fijado a 30 oficinas o comités según las categorías de producto y el funcionamiento de funcionamiento. Los productos de las calidades de miembro incluyen 20 categorías tales como equipo móvil de tierra, equipo de excavación, equipo de elevación, vehículos industriales, pavimento y equipo del mantenimiento, equipo de la compactación, equipo de la perforación de roca, herramientas neumáticas, concretas
El equipo, el equipo aburrido, el equipo del producto concreto, la maquinaria de la viruta, el equipo municipal y utilitario, el equipo de trabajo de Arial, el equipo de la decoración, la maquinaria del Re-bar y del concreto pretensado, la maquinaria de construcción para el ejército, la maquinaria de construcción ferroviaria, el elevador y la escalera móvil, el otro material de construcción especializado, piezas y componentes para la maquinaria de construcción.

La asociación apunta proporcionar servicios a las empresas, al gobierno y a los clientes y estimular el desarrollo de la industria china de la maquinaria de construcción. Las tareas de la asociación son proteger el derecho legal de las calidades de miembro, reflejar las voluntades y los requisitos de calidades de miembro, coordinar las relaciones internas dentro de la industria, realizar las leyes estatales, las regulaciones y las políticas, estipular las reglas y las especificaciones para la industria, proponen las sugerencias de la política que estimulaban el desarrollo de la industria, asisten al gobierno para realizar a la gerencia macra de la industria, satisfacen el trabajo preparatorio de las hojas de operación (planning) de desarrollo de la industria y desempeñan el papel el puentear y del enlace entre el gobierno y las empresas.

La asociación tiene estrechas relaciones con empresas y clientes y dinámico sirve a las empresas y a clientes. La asociación ha hecho porciones de trabajo en los aspectos tales como las hojas de operación (planning), información, estadísticas, exposición, investigación y desarrollo del producto, comercialización, ajuste de organización, servicios de atención al cliente, calidad, consultando y tasando. La asociación tiene establece contactos anchos con asociaciones no nativas y las empresas en esta industria y contribuidas a la introducción de la tecnología de los avances, introducción de fondos no nativos, cooperación técnica e intercambio internacional, y la mejora las ventajas de las empresas' y calidad del producto económicas.

La introducción abreviada de maquinaria de la decoración y del trabajo aéreo ramifica
La ramificación de la maquinaria de la decoración y del trabajo aéreo de la ASOCIACIÓN de la MAQUINARIA de CONSTRUCCIÓN de CHINA (CCMA), es aprobada por el ministerio de las carrocerías de los asuntos civiles (representante), número de certificado de registro: carácteres de la tarjeta de la comunidad 3240-20.

Como unidad de gerencia centralizada nacional, la ramificación es articulada por las empresas que se relacionan en el campo de la maquinaria de la decoración y las operaciones a gran altitud, diseño de producto mecánico, fabricación, las unidades de la detección de la investigación científica, las ventas y alquiler con opción a compra y otros. El alcance del asunto aprobado por el nacional está como abajo: gerencia de la industria, consejo técnico, información, estadísticas, entrenamiento estándar, gravamen de la calificación, cooperación internacional para la maquinaria de la decoración, plataforma de trabajo aéreo (coche), plataforma suspendida, máquinas de la limpieza de ventana, maquinaria del jardín.

El propósito de la ramificación es servicios a los asuntos, a los gobiernos y a los utilizadores, y promueve el desarrollo de la industria de la maquinaria de la decoración y del trabajo aéreo, la misión de la ramificación es salvaguardar las derechas legítimas y los intereses de sus miembros, de reflejar deseos y los requisitos a los miembros los', coordinación de relaciones intraindustriales, la puesta en práctica de leyes nacionales, las regulaciones del gremio de las regulaciones y las políticas, de desarrollar, y de promover activamente la industria de autogestión, proponen recomendaciones de política de promover el desarrollo de la industria, y de desempeñar un papel del puente y de la conexión entre el gobierno y las empresas.
Maquinaria rígida 2015 de Wuxi de los derechos reservados del © Co., LTD
Correspondencia de sitio  /Diseñado cerca preguntar-tecnología/   Manejar la entrada

Leave a Message